hello,
I have setup my exchange 2010 on vmware workstation, but everytime I shutdown the workstation and then switch on,for the exchange to work I have to restart all the services related to exchange even it is automatic hence it would take almost 30 minute to make the exchange to work.
Hence anyone please suggest me to avoid these regular activity means I don't want to start any services after restarting the box.
is there any script is there which will do all the basic check up
We have 10 users who's mailbox has been quarantined and deemed "poisonous". In the registry for each of the mailbox GUID's, it has aMailboxQuarantineDescription that states the following:
NullReferenceException: MESSLDM.MessageViewTable.GenerateDataAccessOperatorForIndexPopulation,MESSLI.LogicalIndex.BuildPopulationQueryOperatorDefinition,MESSLI.LogicalIndex.BuildPopulateObjectIfNecessary,MESSLI.LogicalIndex.PrepareIndexImpl,MESSLDM.MessageViewTable.PrepareIndexes
I am trying to determine why the mailboxes were quarantined, but this is very cryptic to me. Does anybody have any suggestion on how to determine why the mailbox was quarantined? I see that the quarantines will all end between 2PM and 4PM today, but if they should somehow wind back up in the quarantine, I would like to determine root cause. Any information would be greatly appreciated.
--Scott
I have Exchange 2010 SP3 installed. I want to know is it necessary to install all rollup 1 to 11 or just install last rollup?My scenario is . 1 Domain (Windows 2008 R2 SP1) , Exchange 2010 SP3.
Hello
I have user1, who shares calendar with user2
user2 has owner/editor permissions over user1 calendar
When user1 receives a meeting request, it shows as tentative in his own calendar, but, user2, cant see this meeting request while is in tentative.
user2 needs this, because user2 accepts the meetings from the shared calendar.
This happens on Exchange 2013, on exchange 2010 was working fine.
Any tips on where we are missing some config for this?
Regards
hi,
1-wat is beter to install exchnge server on windows server or on VM(hyper-V) of the server and why?
2- can you also install exchange on a computer whitout any OS?
thanks
johan
h.david
Exchange 2013 cu4
i have this D:\Program Files\Microsoft\Exchange Server\V15\Loggingdirectory where the size is 16GB. i want to keep it to a minimum. can i safely delete all logs there maintaning only the last 30 days worth?
Hi all,
I´m trying to Import Holidays into the outlook-calendars of all the employees of my Company. Therefore I created a sample.hol file containing the Dates and imported this into an empty calendar. I then exported it to a .pst file which I now want to Import into the calendars of all users. The pst seems fine - I can Import it in the test System without any hassle.
However, when I try to Import the pst on the production Exchange (Ex2013 CU10), I always get the error pasted below.
The user running the script has Import/Export rights, the Servers are all up and running fine, the allowed message sizes are set to high enough values. Any idea what could be causing this?
Thanks!
Best regards
Nico
New-MailboxImportRequest -Mailbox sampleuser -Filepath
\\server01\C$\Feiertage_2016.pst -Inc
ludeFolders "#calendar#"
Error:Cannotopen mailbox/o=xyz/ou=ExchangeAdministrativeGroup/...MapiExceptionLogonFailed
RunspaceId : 4e983401-c841-4ee6-81e5-0bc316527bec
Name : MailboxImport2
Status : Failed
StatusDetail : FailedMAPI
SyncStage : None
Flags : IntraOrg, Pull, Suspend
RequestStyle : IntraOrg
Direction : Pull
Protect : False
Priority : Normal
WorkloadType : Local
Suspend : True
FilePath : \\LVMC01\C$\sbg00568\Feiertage_2016.pst
ContentCodePage :
SourceRootFolder :
TargetAlias : sbg00568
TargetIsArchive : False
TargetExchangeGuid : da18854a-e636-42d5-a844-2913708e8ac3
TargetRootFolder :
RecipientTypeDetails : UserMailbox
TargetVersion : Version 15.0 (Build 1130.0)
TargetDatabase : Test
TargetServer : lvmb03.land-sbg.gv.at
TargetMailboxIdentity : land-sbg.gv.at/Sbg/Org/2/200/2002/sbg00568
IncludeFolders : {#calendar#}
ExcludeFolders : {}
ExcludeDumpster : False
ConflictResolutionOption : KeepSourceItem
AssociatedMessagesCopyOption : Copy
BatchName :
BadItemLimit : 0
BadItemsEncountered : 0
LargeItemLimit : 0
LargeItemsEncountered : 0
QueuedTimestamp : 02.01.2016 10:13:11
StartTimestamp :
LastUpdateTimestamp : 02.01.2016 11:09:45
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 1.22:13:51.2707187
TotalSuspendedDuration : 00:00:00
TotalFailedDuration : 1.21:17:17.6267180
TotalQueuedDuration : 00:21:25.1909171
TotalInProgressDuration : 00:35:08.4530836
TotalStalledDueToCIDuration : 00:00:00
TotalStalledDueToHADuration : 00:00:00
TotalStalledDueToMailboxLockedDuration : 00:00:00
TotalStalledDueToReadThrottle : 00:00:00
TotalStalledDueToWriteThrottle : 00:00:00
TotalStalledDueToReadCpu : 00:00:00
TotalStalledDueToWriteCpu : 00:00:00
TotalStalledDueToReadUnknown : 00:00:00
TotalStalledDueToWriteUnknown : 00:00:00
TotalTransientFailureDuration : 00:35:04.6092882
TotalIdleDuration : 00:34:55.4841605
MRSServerName :
EstimatedTransferSize : 0 B (0 bytes)
EstimatedTransferItemCount : 0
BytesTransferred : 0 B (0 bytes)
BytesTransferredPerMinute : 0 B (0 bytes)
ItemsTransferred : 0
PercentComplete : 0
CompletedRequestAgeLimit : 30.00:00:00
PositionInQueue :
InternalFlags : None
FailureCode : -2146233088
FailureType : ConnectionFailedTransientException
FailureSide : Target
Message : Error: Cannot open mailbox /o=Land Salzburg/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=sbg00568. --> MapiExceptionLogonFailed:
Unable to open message store. (hr=0x80040111, ec=-2147221231)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=283]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned
[ec=0x0][length=344][latency=0]
Lid: 52176 ClientVersion: 15.0.1130.7
Lid: 50032 ServerVersion: 15.0.1130.6007
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x80040111
Lid: 26937
Lid: 21921 StoreEc: 0x80040111
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 47536
Lid: 41232
Lid: 60208
Lid: 37136
Lid: 47920
Lid: 58951
Lid: 51472
Lid: 41232
Lid: 60208
Lid: 37136
Lid: 59184
Lid: 55056
Lid: 42768
Lid: 56319
Lid: 55336
Lid: 56296
Lid: 51944 StoreEc: 0x80040111
Lid: 56872 dwParam: 0xFE
Lid: 42712 StoreEc: 0x80040111
Lid: 10786 dwParam: 0x0 Msg: 15.00.1130.005:lvmb03
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80040111
Lid: 26297
Lid: 16585 StoreEc: 0x80040111
Lid: 32441
Lid: 1706 StoreEc: 0x80040111
Lid: 24761
Lid: 20665 StoreEc: 0x80040111
Lid: 25785
Lid: 29881 StoreEc: 0x80040111
FailureTimestamp : 02.01.2016 11:09:44
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : 92286f33-4d6b-4e46-a489-ccf2bb10180f
RequestQueue : Test
Identity : 1f7a92a4-4593-4671-9c7c-cbf855bbd80f\92286f33-4d6b-4e46-a489-ccf2bb10180f
DiagnosticInfo :
Report :
ObjectState : NewI am running exchange server 2013 CU9
I have two servers on DAG. both running CAS and DBS roles. DAG is working perfectly , however when the primary server goes down, the database on the live Server is properly activated by however my outlook cannot seem to pick and connect to the server.
please assis in:
- certificate setup
- loadbalancing ( concidering I don't have a loabdbalncer)
- failover
Exchange 2010 SP3 rollup 8v2: three CAS/HT servers with load balanced VIP of mail.domain.com. That domain is used for all internal and external URLs except autodiscover sets the server value in Outlook to outlook.domain.com when using OA. This has and continues to work perfectly for Exchange 2010 mailboxes. These servers are running on Server 2008 Ent. All servers are virtual with 64GB ram and multiple 10G NICS iSCSI MPIO, Mapi, and Replication.
Exchange 2013 SP1 CU8: four multirole servers with a separate load balanced VIP of mail.domain.com (same as 2010). That domain is used for all internal and external URLs just as it is in the 2010 servers. These servers are running on virtualized Server 2012 R2 with the same config as the 2010 servers.
The OutlookProvider values for EXCH, EPR, and WEB are set to msstd:mail.domain.com
When I changed DNS to point mail.domain.com and autodiscover.domain.com to the Exchange 2013 VIP I received a number of complaints from end users that they either could not connect to their 2010 mailboxes or the connections would drop and not reconnect for extended periods of time.
I backed the DNS changes out and am now testing using virtual desktops with host file entries for both mail.domain.com and autodiscover.domain.com to the 2013 servers. What I've found is:
I've seen other questions about similar issues but have not found a solution that helps. Any thoughts are appreciated.
I wondered, why the ExLogAnalyzer is not any longer available for download?
Are there any other download links available?
Thanks
Florian
When we run the shell command to show the recovery password we can see the recovery password:
Get-MobileDeviceStatistics -Mailbox "<user>" -ShowRecoveryPassword:$true
But when we login on Outlook Web App to see the recovery password for the user we can't find it.
This TechNet for Exchange 2010 gives the following steps but can't reproduce with Exchange 2013:
https://technet.microsoft.com/en-us/library/aa996351(v=exchg.141).aspx
Is there an option that's has to be enabled for the device recovery password to be viewed by the user on Outlook Web App?
blind carbon copy (Bcc) block in exchange 2013
I got this infamous error in our Outlook 2007/2010 and Exchange 2010 SP1 environment. I have followed some KBs onine like this one, https://support.microsoft.com/en-us/kb/940726 to make sure all the Internal and External URls are pointed our external DNS server name on AutoDiscover, OAB, OWA etc. However, the cert error still pops up. The only thing making progress is the error pops up once instead of twice. I must have still overlooked something. Please advise.
Thanks
Calvin
Hi all,
I have a question about adding a new SSL cert from GlobalSign.
The new cert has been added to IIS a few days before the current one expires. Simply because the expiration date of the current cert lands on a weekend and no one will be about to add the new cert over the weekend.
The new SSL cert is added and looks fine however I have a couple of concerns.
- the friendly name is different which I am 99% sure is ok
- more importantly the issued by field is slightly different. The current SSL cert issued by field reads "GlobalSign Domain Validation CA - G2". However the new SSL cert issued by field reads "GlobalSign Domain Validation CA - SHA256 G2"
Does the issued by filed matter at all? I just want to be sure the cert will work when the current one expires.
Thanks in advance.
It looks like the -local switch is broken
Get-MailboxDatabaseCopyStatus -identity 'mailbox_db_name' -Local
Get-MailboxDatabaseCopyStatus -identity 'mailbox_db_name' -Active
Both commands appear to return the database status from the active server. Can anybody else try this and confirm the results I am seeing?
New to Audit logs and just noticed a bunch of failures with a bunch of random Account Names that don't exist and coming from a workstation that does not exist on our network.
Account names are for example. FTpuser, operator, test, POS, cashier, Restaurant, etc. (none of these exist on our network)
-Only thing I have determined is it's not coming from our FTP server. If anyone can shed some light on this that would be great!
------------------------------
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: POS3
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xC000006D
Sub Status: 0xC0000064
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: Windows7
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
So I'm in an Exchange environment, but I'm not sure this is explicitly related to Exchange.
We have DLP devices in between HT's and 4 EDGE servers for outbound internet email. For some reason, we're seeing significantly more volume to one of the 4 EDGE servers from the DLP devices. We're just using DNS round robin for the EDGE server MX records as you can only have one destination smarthost. Would it be possible that the DLP devices are "caching" a single MX record and are heavily favoring it? I think I understand how MTA's treat MX records - if they're all same pref, it just goes through at random until it makes a connection. If that's right, I can't think of why we're seeing this issue. Any ideas?
Hello,
i have succesfully migrated from Exchange 2010 to Exchange 2013.
Everything was running after i migrated the public folders they disappeared on the Clients after starting Outlook 2013.
We are able to see the public Folders in OWA but not in Outlook.
Anybody know this Problem and can help?
regards
René