Is there a baseline or range that the numbers under this counter should be? I see range of 0 to 28,000.
↧
MSExchange ActiveSync\Average Request Time
↧
What happens if I don't set external URL for ECP?
I have concerns regarding the external access for ECP. I have seen some solutions regarding it, but I have to work on them later. Until then, would it be ok if I do not to set an external URL for ECP?
↧
↧
Exchange 2010 user mailbox to auto accept meeting invites
Is there a way to setup the user mailbox on exchange if someone sends that person a meeting invite it will auto accept it without outlook having to be open.
We are using exchange 2010. I am not sure if there is a power shell option that we use to set this option.
↧
Exchange server services not running
Dear All,
We have windows server 2012R2 with GC domain controller two numbers in two site (Site A and Site B) and we installed exchange server 2013 in site A successfully it was working fine But now we have a some problem in site B ( Power Problem ) so totally we shutdown Site B Domain controller .. Now My site A exchange server is not working many services staring but not running
Please could you see my image ...
2.
↧
Smarthost and SSL/TLS
Hi,
I have an Exchange 2013 server for my small Company. One server for everyone. I have a send connector configured to forward outgoing e/mails to an ISP. Everything has been working very well but now I changed ISP. The new ISP has configured their server for me using basic authentication and SSL/TLS enabled over port 465.
I have changed port to 465 using set-sendconnector command.
The ISP has created the smarthost server only for me and it has its own self generated certificate and I have received the serial number for the certificate.
I don't know what to do with the serial number so I did nothing.
Now when I try to send mail it gets stuck in the queue with error 4.4.1 and 4.4.2. I assume its because of issues with the smarthost certificate.
Any suggestion how I should handle this situation?
Thanks!
↧
↧
Logging on to mail server, failed within Outlook.
Hi guys,
Currently I'm having an issue in creating mailboxes within Outlook. As stated in the subject all steps verifies until it gets to the point of "logging on to the mail server"
For testing purposes I use the Auto Account setup, not specifying the exchange server FQDN and outlook anywhere details. Prior to the issue I'm experiencing now it did work through this method.
During the auto account setup it successfully verifies the following: Establishing network connection, searching for the email address settings ( where it prompts authentication, once given resolves successfully ), and finally at the last step of "logging on to the mail server" it prompts authentication once again, after given once more, it fails, stating Exchange should be online or connected.
This is a new installation of Exchange 2013 Std on a small scale for 10-20 users. Installed as a stand-alone server.
All mailboxes are accessible through OWA, just setting up from within Outlook where the issue is encountered.
I've successfully queried the autodiscover service which resolves to the correct address as well as the FQDN for external use ( as for OWA ).
What am I missing here, can it be certification issue? I'm currently using the self-signed certificates exchange generated by default during installation, as I'm waiting on the releasing of a 3rd party SSL cert. Creating these mailboxes in Outlook did work previously, also only relying on the self-signed certs.
Any advise would be appreciated.
Regards
↧
Outlook connectivity to Exchange server
Hi guys
I've recently deployed Exchange 2013 Std as a stand-alone server.
Mailboxes I've created is accessible through OWA and can be set up on mobile devices, but Outlook keeps failing in the setup of these mailboxes, stating it should be online or connected.
What could be the cause of this, certificates?
Thanks in advance.
Regards
↧
550 5.7.1 Requested action not taken: message refused
Dear All
In our exchange 2013 enviroemnt some of the external users complains that their email got bounced with following error message
550 5.7.1 Requested action not taken: message refused.
What may be reason.?
It happening only for few users.
Kindly advice please.
Ashraf
↧
exchange server name = 8e758aef-9c56-4f46-ab64-4a46a72f0f08
after migrating a few users to ex2013 their clients have 8e758aef-9c56-4f46-ab64-4a46a72f0f08 in the server name field. creating a new profile does not fix either.
most of them are connecting to the server but it odd to see that instead of true name.
↧
↧
Exchange 2013: users can not login to OWA & outlook, Only administrator (domain\administrator) can login to OWA & outlook. Event viewer points to RBAC
Setup details
Newly installed
Exchange 2013 sp1 cu9
Microsoft Windows Server 2008 R2 Standard SP1
Issue: Users can not login to OWA & outlook, Only administrator (domain\administrator) can login to OWA & outlook.
Errors:
Event ID; 15
Source: MSExchange RBAC
(Process w3wp.exe, PID 9696) "RBAC authorization returns Access Denied for user S-1-5-21-1638150355-3439293087-3538241838-1144. Reason: Call to NativeMethods.AuthzInitializeContextFromSid() failed when initializing the ClientSecurityContext. Exception: Microsoft.Exchange.Security.Authorization.AuthzException: AuthzInitializeContextFromSid failed for User SID: S-1-5-21-1638150355-3439293087-3538241838-1144. ---> System.ComponentModel.Win32Exception: No mapping between account names and security IDs was done--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.Authorization.ClientSecurityContext.InitializeContextFromSecurityAccessToken(AuthzFlags flags)
at Microsoft.Exchange.Security.Authorization.ClientSecurityContext..ctor(ISecurityAccessToken securityAccessToken, AuthzFlags flags)
at Microsoft.Exchange.Security.Authentication.GenericSidIdentity.CreateClientSecurityContext()
at Microsoft.Exchange.Security.Authentication.IIdentityExtensions.GetAccessToken(IIdentity identity)
at Microsoft.Exchange.Security.Authentication.IIdentityExtensions.GetGroupSIDs(IIdentity identity)
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration.GetGroupAccountsSIDs(IIdentity logonIdentity). "
Event id: 23
Source: MSExchange RBAC
(Process w3wp.exe, PID 9696) "Exchange AuthZPlugin Fails to finish method GetApplicationPrivateData due to application exception Microsoft.Exchange.Configuration.Authorization.CmdletAccessDeniedException: The operation couldn't be performed because 'S-1-5-21-1638150355-3439293087-3538241838-1144' couldn't be found.at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration.GetGroupAccountsSIDs(IIdentity logonIdentity)
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration..ctor(IIdentity logonIdentity, IIdentity impersonatedIdentity, ExchangeRunspaceConfigurationSettings settings, IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, IList`1 logonUserRequiredRoleTypes, Boolean callerCheckedAccess, Boolean isPowerShellWebService, Boolean noCmdletAllowed, SnapinSet snapinSet)
at Microsoft.Exchange.Configuration.Authorization.ExchangeExpiringRunspaceConfiguration..ctor(IIdentity identity, ExchangeRunspaceConfigurationSettings settings, Boolean isPowerShellWebService)
at Microsoft.Exchange.Configuration.Authorization.ExchangeAuthorizationPlugin.GetInitialSessionStateCore(PSSenderInfo senderInfo)
at Microsoft.Exchange.Configuration.Authorization.ExchangeAuthorizationPlugin.<>c__DisplayClass4.<GetApplicationPrivateData>b__3()
at Microsoft.Exchange.Configuration.Authorization.AuthZLogHelper.HandleExceptionAndRetry[T](String methodName, Func`1 func, Boolean throwException, T defaultReturnValue)."
Event id: 258
Source: MSExchange RBAC
(Process 9696, PID w3wp.exe)"RemotePS Public API Func GetApplicationPrivateData throws Exception Microsoft.Exchange.Configuration.Authorization.CmdletAccessDeniedException: The operation couldn't be performed because 'S-1-5-21-1638150355-3439293087-3538241838-1144' couldn't be found.at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration.GetGroupAccountsSIDs(IIdentity logonIdentity)
at Microsoft.Exchange.Configuration.Authorization.ExchangeRunspaceConfiguration..ctor(IIdentity logonIdentity, IIdentity impersonatedIdentity, ExchangeRunspaceConfigurationSettings settings, IList`1 roleTypeFilter, List`1 sortedRoleEntryFilter, IList`1 logonUserRequiredRoleTypes, Boolean callerCheckedAccess, Boolean isPowerShellWebService, Boolean noCmdletAllowed, SnapinSet snapinSet)
at Microsoft.Exchange.Configuration.Authorization.ExchangeExpiringRunspaceConfiguration..ctor(IIdentity identity, ExchangeRunspaceConfigurationSettings settings, Boolean isPowerShellWebService)
at Microsoft.Exchange.Configuration.Authorization.ExchangeAuthorizationPlugin.GetInitialSessionStateCore(PSSenderInfo senderInfo)
at Microsoft.Exchange.Configuration.Authorization.ExchangeAuthorizationPlugin.<>c__DisplayClass4.<GetApplicationPrivateData>b__3()
at Microsoft.Exchange.Configuration.Authorization.AuthZLogHelper.HandleExceptionAndRetry[T](String methodName, Func`1 func, Boolean throwException, T defaultReturnValue)
at Microsoft.Exchange.Configuration.Authorization.AuthZLogHelper.<>c__DisplayClassc`1.<ExecuteWSManPluginAPI>b__8()
at Microsoft.Exchange.Diagnostics.CmdletInfra.Diagnostics.ExecuteAndLog[T](String funcName, Boolean missionCritical, LatencyTracker latencyTracker, ExEventLog eventLog, EventTuple eventTuple, Trace tracer, IsExceptionInteresting isExceptionInteresting, Action`1 onError, T defaultReturnValue, Func`1 func). fails with Exception %4 ."
↧
Deliver emails for mailboxes which don't exist to an admin mailbox
Hi all,
I have a SBS 2008 server running Exchange 2007. I am wondering how I can receive all mail for the domain and not send external NDR's.
If someone emails "dsafafds@domain.com" and that user/mailbox does not exist... I still want it to deliver the mail to "admin@domain.com".
Thank you for your help!
↧
Exchange 2013 troubleshooting
If internally in the organisation mail is not transferred or received by the user but he is able to ping the server then how to troubleshoot this problem and find a solution ???
↧
Exchange 2013 - Office 365 Hybrid - Free Busy from On Premises to Online causing MS Exchange Availability 4001 Error
Hi
As the title says, I have an Exchange 2013 server configured for Office 365 in Hybrid mode.
When interrogating Free Busy information of an online mailbox via an on premises Outlook client, I get the following Error on the Exchange 2013 server.
Process Microsoft.Exchange.InfoWorker.Common.Delayed`1[System.String]: <.mail.onmicrosoft.com>SMTP:taccount-1@<mydomain>.mail.onmicrosoft.com">taccount-1@<mydomain>.mail.onmicrosoft.com>SMTP:taccount-1@<mydomain>.mail.onmicrosoft.com
with error System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult)
at Microsoft.Exchange.SoapWebClient.AutoDiscover.DefaultBinding_Autodiscover.EndGetUserSettings(IAsyncResult asyncResult)
at Microsoft.Exchange.InfoWorker.Common.Availability.UserSoapAutoDiscoverRequest.EndGetSettings(IAsyncResult asyncResult)
at Microsoft.Exchange.InfoWorker.Common.Availability.SoapAutoDiscoverRequest.<>c__DisplayClass4.<EndInvoke>b__3()
at Microsoft.Exchange.InfoWorker.Common.Availability.SoapAutoDiscoverRequest.ExecuteAndHandleException(ExecuteAndHandleExceptionDelegate operation). ---> System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult asyncResult)
at Microsoft.Exchange.SoapWebClient.AutoDiscover.DefaultBinding_Autodiscover.EndGetUserSettings(IAsyncResult asyncResult)
at Microsoft.Exchange.InfoWorker.Common.Availability.UserSoapAutoDiscoverRequest.EndGetSettings(IAsyncResult asyncResult)
at Microsoft.Exchange.InfoWorker.Common.Availability.SoapAutoDiscoverRequest.<>c__DisplayClass4.<EndInvoke>b__3()
at Microsoft.Exchange.InfoWorker.Common.Availability.SoapAutoDiscoverRequest.ExecuteAndHandleException(ExecuteAndHandleExceptionDelegate operation)
--- End of inner exception stack trace ---
. Name of the server where exception originated: EXSERVER-2. This event may occur when the Mailtips application cannot discover a corresponding application in the remote forest.
I have tried everything. All federation and organization tests work as expected. They show the tokens being requested and successfully delivered to and from the on premises and online endpoints. In short, I'm almost completely sure I have the hybrid mode configured correctly - as every thing else (all mail flow etc.) works. But what is causing this error message and stopping free/busy information in one direction?
All help much appreciated.
Andrew
↧
↧
message sending failed
Hi ,
We are using exchange 2013, we are facing a strange issue.
One of my user is using his mailbox on two differant system in same network . Now , when he is sending email to his own account or any local exchange user he is getting error mentioned below.
=================================================================
Your message did not reach some or all of the intended recipients.
Subject: test
Sent: 18/06/2015 15:50
The following recipient(s) cannot be reached:
Johnson, Graham on 18/06/2015 15:50
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
==================================================================================
I have removed the outlook profile fully , and recreate it , download the OAB manually in his system..remove old oab ..but still facing the issue...
the same thing is working fine on another system in network..so what could be the issue..
please help..
thank you..
↧
Need repair or take long time after 2010 -> 2013 migration
Hi!
I have a problem when migrating to exchange 2013 that some users need to repair their outlook for it to realize that the mailbox is moved to a new database, for some, it works right away after a restart of outlook and for some it takes time and for others they need to repair their outlook.
What happens:
- Mailbox is migrated
- Outlook notifies user that administrator have made changes, "please restart outlook"
- After restart, Outlook says, "connected to microsoft exchange" but can't send or receive emails.
- In account settings -> Server settings. the old CAS-array is still specified as server, not the "GUID"-server.
Autodiscover works when testing outlook connectivity.
I have no idea why it works for some but not for others! Any ideas ?
Exchange server 2013 Cu8 on Server 2012 R2
Thanks!
↧
Exchange 2013 NDRs
Hi,
I would like to receive NDR's to tell people that an email address does not exist. This works internally but not externally, can anyone advise how to enable this?
Thanks
Dave
↧
Going from SBS 2003 to ??? Really need a server product with exchange.
I'm in a bit of a prediciment. My very small (4 user) office runs SBS 2003. We wanted in-house exchange to keep our emails private and to run Blackberry BES software for our 2 BB users. The only other features we use are MS Backup and we map each of the 4 pc's to the server drive to keep our shared data. Two of our windows 7 machines don't even log in, they just map a drive to the shared data.
The reason I'm contemplating upgrading has to do with our Blackberry BES software. The new version (to support BB 10 phones) requires Server 2008 or newer. If it weren't for that, I think we'd just keep plugging along on SBS 2003.
MS no longer sells any SBS software. I would have like to use SBS 2011, but I am not finding any reliable source or if I am, it's 2500-3000 dollars. Not going to happen, not to upgrade 2 BB phones.
Is it possible to run a MS Exchange server software with 5 user cals and allow them to MAP a drive to the server for their shared data? Again, since we aren't really using any of the features of SBS, logging in isn't really even necessary.
Do I have any options here?
I'm also exploring keeping the SBS 2003 and running a stand-alone server just to run the new BES software and point it back to the exchange system. Running that down with the BB guru's.
I can't justify 5-10k worth of hardware and software upgrades for a 4 user office when the push to upgrade is coming from 2 blackberry phones. Looking for a lower cost alternative.
Roveer
↧
↧
Exchange 2013 - Public folders not visiable out of network
Hi
Strange Strange things - I had Exchange 2010 and everything works fine with Public Folder through VPN - now after we moved to new domain with Exchange 2013 cant we se Public folder through VPN - but if we log in locally (from a domain join PC) everythings works fine ? I cant see what I iam missing ? aiam connectet through VPN and I get a local IP and DNS ?
Thanks
↧
content loss of HTML data while sending Mail from powershell to non outlook user.
I am trying to send a Report From Exchange Managment shell exchange 2007.When i send that report to outlook the Display format is proper,email is properly formatting.But when i send that mail to the Lotus it's loosing its all HTMl content such
as CSS,Headline,tables,boders data in the report is same just the format of report become ugly.same I did with exchange 2010 using send-mailmessage everything is fine even i send it to lotus notes user no everthing is fine in both outlook and lotus user. Why
such thing happening please help.
↧
Exchange Online Archiving: Password Synchronization is necessary ??
Is it necessary Password Synchronization on a Hybrid infrastructure to Access Exchange Online Archiving ??
Could I use these components??
1) For user aprovisioning on Exchange Online >> Manually
2) For authentication >> ADFS
↧