Hi,

I've exchange server in multiple zones. In every zone I have separate ADC. the problem is that when I check get-adserversettings

following severs are always changed to different ADC.

DefaultGlobalCatalog
DefaultConfigurationDomainController
DefaultPreferredDomainControllers

I always set them to the ADC where our Database is mounted and control is available. But after few days it changed to other ADC in our environment. How can I fix it to a particular ADC.

Regards,

Anees

Hi,

Not sure if I am in the right forum, but I have setup an on premise exchange 2013 sp1 server.

A proper certificate has been installed, autodiscover record implemented externally and internally.

When I setup Outlook 2013 from within the office on an office computer I can setup the account just using an email address and a password.

If I try to setup an account from a laptop which is outside the organisation, start supplying the email address and password, then the setup stops showing the email address I previously used with the password that I previously supplied, but it does not complete the configuration

To complete the configuration I have to click other account and supply the windows domain name, a backslash and domain username, then the password.

Why can I setup an exchange account in a similar way you would configure it with office 365 in the cloud?

When you use office 365 you can setup an exchange account into Outlook 2013 just supplying an email address and password. 

Same goes for the mobile setup.

With our on premise exchange 2013 server, there is a lot of manual setup on mobile devices despite that autodiscover has been configured correctly.

Hi to all, my question is quite simple. I'm searching a script or another way to archive with a single command all emails of all mailboxes antecedents a date (for example 1st of january 2015) in a mailbox database.

My goal is to launch that script and have 1 pst for each mailbox of the database, the same goal you have when you use archiving in Outlook..it that possibile? It's ok for me also if i can do it  1 mailbox at time...but what i want to avoid is to go on every pc and launch export via Outlook...

Thank you for the help..

Gian

Greetings all and thanks in advance.

Not sure how it happened in the first place, but a end user's mailbox and AD account were accidentally deleted in one fatal move.  I was able to recover the user object using LDP.exe.  Then came the step of attaching the deleted mailbox to the AD object.  Of course, the deleted mailbox does not show up immediately, despite my cmdlet efforts to do so.  I even waited a overnight, but the mailbox did not show up in the connect to a mailbox list. 

So I created a new mailbox.

Now the user is getting a message when starting outlook that "Your mailbox has been temporarily moved on Exchange server"  A temporary mailbox exists, but might not have all of your previous data."  I can use Temp mailbox, Use Old data or cancel.  When using Temp, everything works as expected, until we launch Outlook again.  If I choose Use Old Data, outlook shows the mailbox as it was when deleted and Outlook is set to Offline mode.

But guess what?  The old mailbox is now available in the Connect to a Mailbox list.

Is there a way for me to merge the two?  Can I delete the current mailbox and return to the old one?  I'm afraid the old one won't have the current data.  Or is the thing to do is just to delete the old mailbox and allow him to use the new one that is functioning?

Thanks,

Willis

Dear forum,

I have problem with mailbox users account during exchange database full space. After we get space database is mounted but some mailbox get error, and we cannot connect it. do u have face the same problem please let me know the solutions. your answer is appreciated. 

Regards,

Sam

Hi All,

I'm sort of stuck on the Exchange 2013 Probe Monitors, Monitors such as Imap, ActiveSync, Pop3 and FrontEndTransport keep failing. To fix/check the issue I'm following the below links:

http://technet.microsoft.com/en-us/library/ms.exch.scom.activesync(v=exchg.150).aspx

http://technet.microsoft.com/en-us/library/ms.exch.scom.imap(v=exchg.150).aspx

For example typing in Invoke-MonitoringProbe ActiveSync\ActiveSyncCTPProbe -Server server1.contoso.com | Format-List

I will get the following error:

WARNING: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index

Not sure why I'm getting this error.

For Imap testing i.e. typing in Invoke-MonitoringProbe IMAP\ImapCTPProbe -Server server1.contoso.com | Format-List

I will get the following error:

WARNING: No mailboxes were found to use in the CTP probe.

I'm absolutely stumped on why I'm getting these errors.

I'm running my Exchange servers on Hyper-V 2012 (My Hyper-V 2012 is clustered and managed by VMM 2012 SP1)

I have 8 Exchange 2013 Enterprise CU6 nodes, with 2 DAGS

Each Exchange server is running 4 cores of Processor and 24Gig of Ram (Not using Dynamic Memory)

If someon can shed some light on this issue it would be most appreciated.

Regards

Mike

Hello,
I have a shared mailbox called "Help Desk".
I need to permit to user "User1" the Full Access to this shared mailbox and "send as" and send on behalf from this shared mailbox.

I have Exchange 2013 CU10.

From ECP I have created shared mailbox and from "mailbox delegation properties" I have added user "User1" in "Send As" box and in "Full Access" box.
Even after many hours if User1 try to send e-mail from mail address of "Help Desk" shared mailbox, User1 receive a underiverable error:

This message could not be sent. Try sending the message again later, or contact your network administrator. You do not have the permission to send the message on behalf of the specified user. Error is [0x80070005-0x0004dc-0x000524].

I check permission from powershell and is ok.
Other, I have execute this powershell command: Set-Mailbox -Identity "Help Desk" -GrantSendOnBehalfTo "User1", but problem persist.

Can you help me ?
Tnx
Manuel

Hello,

We have Exchange 2013

Our General Manager share his contact with 2 secretaries. 

Around 1 a week or 2 weeks couple of contacts Disappear (it's can be 1, 2 or 3 contacts).

All people that have Access to this contact told me that they not delete it.

It's can be a bug ?

How can i found who delete it?

There is some log that exist or i can turn on ?

Thank you.

Dear Friend,

We have exchange 2013 CU5 three server setup. Just recently we notice that we are not able to open OWA and ECP. both through that family OPPS something went wrong error. Peoples are able to worj from outlook without any issue, EMS also works without any error. We try to check logs and found below error with event ID 1003

----------------------------

[Owa] An internal server error occurred. The unhandled exception was: System.Runtime.InteropServices.COMException (0x80070005): Access is denied.

   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_Parent()
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.GetWebSiteName(String webSiteRootPath)
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.BaseCreateInstance()
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.get_Instance()
   at Microsoft.Exchange.Clients.Owa.Core.OwaVdirConfiguration.get_Instance()
   at Microsoft.Exchange.Clients.Owa.Core.OwaPage.InitializeCulture()
   at ASP.auth_logon_aspx.__BuildControlTree(auth_logon_aspx __ctrl)
   at ASP.auth_logon_aspx.FrameworkInitialize()
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

---------------------------------------------------------

And below ASP Warning..

------

Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 2/24/2016 4:38:03 PM
Event time (UTC): 2/24/2016 11:08:03 AM
Event ID: 06b607f19a8c4e78ac644fe40372cf3f
Event sequence: 5
Event occurrence: 1
Event detail code: 0
 
Application information:
    Application domain: /LM/W3SVC/1/ROOT/owa-2-131007856119612275
    Trust level: Full
    Application Virtual Path: /owa
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\owa\
    Machine name: XXX
 
Process information:
    Process ID: 10360
    Process name: w3wp.exe
    Account name: NT AUTHORITY\SYSTEM
 
Exception information:
    Exception type: COMException
    Exception message: Access is denied.

   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_Parent()
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.GetWebSiteName(String webSiteRootPath)
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.BaseCreateInstance()
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.get_Instance()
   at Microsoft.Exchange.Clients.Owa.Core.OwaVdirConfiguration.get_Instance()
   at Microsoft.Exchange.Clients.Owa.Core.OwaPage.InitializeCulture()
   at ASP.auth_logon_aspx.__BuildControlTree(auth_logon_aspx __ctrl)
   at ASP.auth_logon_aspx.FrameworkInitialize()
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

 
 
Request information:
    Request URL: https://XXX:443/owa/auth/logon.aspx?url=https://XXX/ecp/&reason=0
    Request path: /owa/auth/logon.aspx
    User host address: 2002:b64a:5ab2::b64a:5ab2
    User:  
    Is authenticated: False
    Authentication Type:  
    Thread account name: NT AUTHORITY\SYSTEM
 
Thread information:
    Thread ID: 11
    Thread account name: NT AUTHORITY\SYSTEM
    Is impersonating: False
    Stack trace:    at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_Parent()
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.GetWebSiteName(String webSiteRootPath)
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.BaseCreateInstance()
   at Microsoft.Exchange.Clients.Owa.Core.VdirConfiguration.get_Instance()
   at Microsoft.Exchange.Clients.Owa.Core.OwaVdirConfiguration.get_Instance()
   at Microsoft.Exchange.Clients.Owa.Core.OwaPage.InitializeCulture()
   at ASP.auth_logon_aspx.__BuildControlTree(auth_logon_aspx __ctrl)
   at ASP.auth_logon_aspx.FrameworkInitialize()
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
 
 
Custom event details:

-------

Any help will be appreciated..

Thanks in advance..

I am trying to migrate a public folder database from exchange 2010 I have followed all the steps the article - https://technet.microsoft.com/en-us/library/jj150486.aspx but when I go to create the public folder mailbox it fails did the -PublicFolder command removed?

Exchange Server 2013 CU11

[PS] C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Microsoft Exchange Server 2013>New-Mailbox -PublicFolder PFMailbox -HoldForMigration:$true
A parameter cannot be found that matches parameter name 'PublicFolder'.
    + CategoryInfo          : InvalidArgument: (:) [New-Mailbox], ParameterBindingException
    + FullyQualifiedErrorId : NamedParameterNotFound,New-Mailbox
    + PSComputerName        : exchange2013.corp.paradyme.com

New-Mailbox -Name <String> -Discovery <SwitchParameter> [-ActiveSyncMailboxPolicy <MailboxPolicyIdParameter>]
    [-AddressBookPolicy <AddressBookMailboxPolicyIdParameter>] [-Alias <String>] [-Archive <SwitchParameter>]
    [-ArchiveDatabase <DatabaseIdParameter>] [-Confirm [<SwitchParameter>]] [-Database <DatabaseIdParameter>]
    [-DisplayName <String>] [-DomainController <Fqdn>] [-ExternalDirectoryObjectId <String>] [-FirstName <String>]
    [-Force <SwitchParameter>] [-ImmutableId <String>] [-Initials <String>] [-LastName <String>]
    [-ManagedFolderMailboxPolicy <MailboxPolicyIdParameter>] [-ManagedFolderMailboxPolicyAllowed <SwitchParameter>]
    [-Organization <OrganizationIdParameter>] [-OrganizationalUnit <OrganizationalUnitIdParameter>]
    [-OverrideRecipientQuotas <SwitchParameter>] [-PartnerObjectId <Guid>] [-Password <SecureString>]
    [-PrimarySmtpAddress <SmtpAddress>] [-QueryBaseDNRestrictionEnabled <$true | $false>] [-RemoteAccountPolicy
    <RemoteAccountPolicyIdParameter>] [-RemotePowerShellEnabled <$true | $false>] [-ResetPasswordOnNextLogon <$true |
    $false>] [-RetentionPolicy <MailboxPolicyIdParameter>] [-RoleAssignmentPolicy <MailboxPolicyIdParameter>]
    [-SamAccountName <String>] [-SharingPolicy <SharingPolicyIdParameter>] [-ThrottlingPolicy
    <ThrottlingPolicyIdParameter>] [-UserPrincipalName <String>] [-WhatIf [<SwitchParameter>]] [<CommonParameters>

We have recently migrated from Exchange Server 2010 to Exchange Online. Users log into a single RDS Server and use Outlook 2010 in cached mode to access email.

We noticed that their email was not searchable from within Outlook, so added the Role on the Server and now we find the Indexing is taking a long time - Users report that within Outlook they receive "Search results may be incomplete because items are still being indexed".

From what I can see the index is indexing but taking a long time? Is the index the one file for All Users or does each User have their own index? It looks as though the index edb file is in the default location C:\ProgramData\Microsoft.

Any help would be appreciated.

Hi,

I am working in a lab where i have exchange 2010 and exchange 2013 (Multi Role) in coexistence environment. I tried to set Outlookanywhere by following command.

Set-OutlookAnywhere "AR3EX01\Rpc (Default Web Site)" -ExternalHostname mail.domain.com -ExternalClientsRequireSsl $true -InternalHostname mail.domain.com -InternalClientsRequireSsl $true –ExternalClientAuthenticationMethod NTLM –SSLOffloading $false

When I set –SSLOffloading $false then Exchange 2013 Users prompting password and even new user can not configure email profile because of password not accepting.

I set –SSLOffloading $True , there is no password prompt and proxy settings also perfect.

What is the logic behind this and what should be exact settings.

Regards

Usman

Usman Ghani - MCITP Exchange 2010

Is there a specific place i can go to and get the exchange 2013 mailbox setup powershell commands so i can copy and paste?

Thanks

Gator78

Hi,

I have Exchange 2010 SP3 and Exchange 2013 SP1 CU11, If i create a new mailbox on Exchange 2013 and configure in outlook 2013 , it works fine , i can see GUID and all other settings but if i migrate a user from Exchange 2010 , Its outlook settings still point to old server name and other settings are also not updating , Please help me to resolve this issue.

Regards

Usman Ghani

Usman Ghani - MCITP Exchange 2010

We are performing cross-forest migrations from Exchange 2010 to Exchange 2013 and we are seeing some users fail to move due to "Fatal error NonUniqueRecipientException"

Cannot find a duplicate SID, MSExchangeGuid, SMTP address or anything along those lines, anyone came across this before? 

www.techielass.com

Hi! Im creating accounts in AD and after creation i want to add them as mail users in exchange with their external emailadress. The problem is they are already in the system as mail contacts. Whats the easiest way to convert them?. Deleting the contact and creating them as a mailuser or what?.

Please help . Thanks in advance!

/E

Hi

I want to distribute a link for changing mobilephone data in 2013 OWA:

When I browse to:

<myowalink>/ecp/personalsettings/Editaccount.aspx/

photo is activated.

Is it possible to crete a link that selects the last bulletpoint contact numbers by default?

Hello Everyone.

We are using System Center Endpoint Protection (SCEP) 2012 for endpoint protection. I have to add antivirus exclusions for Exchange 2013 servers.

Instead of excluding the various subfolders of C:\Program Files\Microsoft\Exchange Server, I have excluded the whole folder of C:\Program Files\Microsoft\Exchange Server.

But my Exchange Admin is insisting that I should also exclude the individual processes running under the folder C:\Program Files\Microsoft\Exchange Server, like the following processes:

C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeDagMgmt.exe

C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeDelivery.exe

C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeFrontendTransport.exe

C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMHost.exe

C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe

So do I really need to exclude the individual processes that are running from the location C:\Program Files\Microsoft\Exchange Server ???

Isn’t it totally illogical to exclude the individual process when we have already excluded the main folder.

Please guide.

Thank you.

Regards,

Hasan

Hi,

I hope someone can help. We have a hybrid Exchange environment made up of 2010/2013/Online and I have been enjoying using the Hybrid ECP where all environments can be managed. We recently upgraded Exchange 2013 to CU11 and since then, this doesn't work.

If I go the on-premise ECP and click Office 365, that works but, if I then try to go back to the on-premise ECP, I get the error below:

Client Information
------------------
User Agent: Mozilla/5.0 (Windows NT 6.1; rv:44.0) Gecko/20100101 Firefox/44.0
CPU Class: undefined
Platform: Win32
System Language: undefined
User Language: en-GB
CookieEnabled: true
-----------------
Exception Details
-----------------
Date: Fri Feb 26 2016 14:15:32 GMT+0000 (GMT Standard Time)
Message: Error: Permission denied to access property "frameElement"
Url: https://email.domain.com/ecp/15.0.1156.6/scripts/common.js
Line: 1

Call Stack
----------
ErrorHandling.$EM@https://email.domain.com/ecp/15.0.1156.6/scripts/common.js:1:172926
ErrorHandling.showUnhandledException@https://email.domain.com/ecp/15.0.1156.6/scripts/common.js:1:171997





Detailed Call Stack
-------------------

That error is from Firefox but the problem happens on IE/Firefox/Chrome also on any machine I test. The error in IE is:

Upon researching this error (in a generic sense, not specific to ECP), most people are mentioning adding the site to trusted sites but that doesn't work. Do you think I need to re-run the hybrid configuration wizard? Restarting IIS has made no difference.

Thanks.